Have you been noticing that your door handle has been particularly wobbly or keeps spinning? It might seem that it is not firmly fixed into the door anymore and even that it might be nearing the fate of falling down. This is certainly something you need to look into promptly and fix the loose door handle, preferably before the handle unexpectedly comes right out into your hand!
Your door bears constant usage every day, some of it even being rough. Over time, the condition of their components naturally degrades, and they require having some maintenance work done to be brought back to a reliable and steady condition. The issues can range from rubbing doors to loose door handles or knobs, which should be resolved promptly.
Because while the loose doorknob or handle issue may start off as a minor nuisance, neglecting this issue can eventually turn on you as a big hassle if it locks you in or out of your room or even your house. A loose handle can also pose a concerning security breach if you can not close your front door due to the issue worsening.
Fortunately, sorting this issue out certainly is easy! A locksmith can sort it out for you in no time. Should your skills allow it, even you can handle it on your own (pun intended!) and tighten the loose door handle. Read on to find out.
Thinking of resolving your wobbly handle with a DIY solution? It is certainly possible to repair a loose handle on your own! However, it might not be as easy as you hope since the door handles and knobs have various intricate parts. In order to find the set screw and tighten the screws, you will need to disassemble the handle and any parts below to gain access to all the screws to look into.
This procedure to tighten the loose door handle can be a bit complicated, and you can risk causing further hurdles in operation of the handle damaging the components and or incorrectly reassembling if you are not careful and mindful. Keep reading to find out the procedure and make sure to keep it gentle and pay attention to how the components are fixed while you take them off.
First off, you need to unscrew and remove the knob or handle in order to inspect the interior screws. Some door handles have their screws visible right on the faceplate, making it easy for you to find them and unscrew them. However, the placement of the screws may differ depending on your type of door handle and may not be easily visible.
While some handles come with exposed screws, some handles have hidden screws which are not easily visible. They are covered by a faceplate, concealing them from the view. This nature of placement is for aesthetic purposes. If your screws are hidden, then the process is a bit more complicated than it would be for visible screws. Even this hidden set screw structure may vary.
Trying either method depending on the structure should be able to help you remove the handle and proceed to the next step.
With the handle removed, you now have access to the base. You need to detach it as well in order to gain access to more screws that you can inspect and potentially fix. Then you will come across a ring here, which you will need to remove the base. Use a flathead screwdriver in order to slowly pry the ring loose. And then you should be able to pull out the base and move forward to inspecting the screws that are now exposed.
Now that the base is removed, you can take your time to inspect the set of screws holding the handle that run through the door. You should make sure to not leave any out and tighten each one properly to fix the loose door handle. Be on lookout for any screws that are showing the signs of being worn down as well. If you find any, then take them out and replace them with new screws.
Ensure to hold the backing plate and keep the door handle aligned while you work on the screws. Once you are done, it is time to reassemble your handle and check if it works!
Now that you are all done with what you have disassembled the handle for, it is the time to install everything back and secure the handle into its place. Make sure to be meticulous when installing everything back, because you do not want to cause yourself further headaches by leaving something loose or incorrectly installed! Make sure to align the handle properly, because it can be a culprit behind its looseness too.
Ideally, your door handle should be firmly fixed in its place now and your DIY efforts to tighten the loose door handle should have succeeded. However, if it is still wobbly, then it can be an indicator of a deeper problem or at least too difficult to fix on your own. This is when you should consider giving a call to a locksmith.
In order to ensure that all the handle screws are tightened and working in a good condition, you will need to disassemble the handle to gain access to them and replace or tighten any as needed. This will certainly require your time and attention to details. You will have to dismount the handle, and then any components to dismount the base, and structures for each step may vary. While you disassemble and reassemble the handle, you need to be careful not to damage any component nor incorrectly assemble a part.
Additionally, even after your DIY fix attempt, you may find that the issue is still persisting. It is possible that the work was actually not done correctly, or even that there is a deeper problem like a damaged part that requires replacement or the door handle degrading to the point that the entirety of it needs a replacement. It certainly can be easy for the DIY venture for fixing a loose door handle go futile and awry due to inexperience. When in doubt, seek the services of a locksmith.
So save yourself the time and hassle and give a call to an experienced locksmith! Our locksmiths in Whitby are ready to assist you and get rid of your wobbly door handle. We can repair or replace any malfunctioning components and get your door handle back to its reliable condition in no time.